Introducing UWELL Brand and CALIBURN Series Vape Device
UWELL is a most popular vape brand in the world. It’s established 2015. It’s providing very high-tech quality vape devices. Innovative atomization technology, strict quality control system, advanced manufacturing capabilities, and high service standards have positioned UWELL as a top e-cigarette brand worldwide. UWELL is the first to innovate self-cleaning tech for tanks, making mess a thing of the past. It has many types of devices. Most popular from UWELL is Caliburn series. Caliburn has many models pod mod devices. Below the describe about Uwell Caliburn Series Devices.
Specification of UWELL CALIBURN Series Vape Device
CALIBURN G
- Dimensions: 108.3mm x 22.5mm x 12.6mm
- Refillable pod mod
- 2ml pod capacity
- 690mAh battery Capacity
- 15W output Power
- USB-C charging System
- Adjustable Airflow
CALIBURN KOKO
- Dimensions: 67mm x 43mm x 12mm
- aluminum alloy Material
- 11W Output power
- 1.2Ω Coil Resistance
- Direct output voltage
- 520mAh Battery Capacity
- micro–USB Charging port
CALIBURN KIT
- Dimensions – 110 x 21.2 x 11.6 mm
- 520 mAh battery capacity
- 11 W Output power
- 3.2-4.0 V output Voltage
- 1.2-1.5-ohm coil resistance
- 2ml liquid capacity in pod
- Micro usb charging system
CALIBURN A2
- Dimensions – 110mm by 21.3mm by 11.7mm
- 520mAh Battery Capacity
- 15W Maximum Output power
- Aluminum-Alloy material
- Draw or Button Activation system
- LED Battery Life Indicator Light
- 2mL liquid Capacity in pod
- Top Fill System
- 0.9ohm UN2 Meshed Coil Pod
CALIBURN G2
- Dimensions – 110mm by 22.5mm by 13mm
- 750mAh Battery capacity
- 18W Max Output Power
- Aluminum Alloy Material
- Dual Firing System
- LED Indicator Light
- 2mL liquid capacity in Pod
CALIBURN GK2
- Dimensions – 72.2mm by 46.6mm by 16.3mm
- 690mAh Battery Capacity
- 18 W Max Output Power
- Zinc-Alloy Chassis Material
- Draw-Activated Firing Mode
- LED Indicator Light
- 2mL liquid Capacity in pod
CALIBURN A2S
- Dimensions – 110.1mm by 21.3mm by 11.7mm
- 520mAh Battery Capacity
- 15W Max Output power
- Aluminum-Alloy Chassis Material
- Draw-Activated Firing Mode
- 2mL Pod Capacity
- Side Filling System
CALIBURN X
- Dimensions: 107.4mm by 27.5mm by 15.6mm
- 850mAh Battery Capacity
- 5-20W Output power
- Aluminum-Alloy Chassis Material
- Juice Viewing Window
- OLED Display Screen
- 3mL liquid capacity in pod
- Top Filling system
CALIBURN A3
- PCTG & Aluminum Alloy Material
- 2ml E-liquid Capacity in pod
- 13W Max Output Power
- Magnetic Pod Connection system
- 1.0ohm FeCrAI Meshed Coil
- Top Filling System
- LED battery indicator light
CALIBURN AK3
- PCTG, Aluminum Alloy Materials
- Dimensions: 67.5 mm x 44.1 mm x 12 mm
- 35.8 g Net Weight
- 2 ml E-liquid Capacity in pod
- 13 W Maximum Output Power
- 1.0 Ω CALIBURN A3 Refillable Pod
- 520 mAh Battery Capacity
CALIBURN A3s
- Dimensions: 109.8 mm x 21.3 mm x 11.7 mm
- PCTG, Aluminum Alloy Materials
- 32.6g net Weight
- 16w max Output Power
- 520 mAh Battery Capacity
- Pod Compatibility: Uwell Caliburn A3, AK3 and A3S
CALIBURN G3
- Dimensions: 115.5 mm × 24 mm × 13.9 mm
- PCTG Aluminum Alloy Materials
- 47g Net Weight
- 2.5 ml / 2 ml (TPD) E-liquid Capacity in pod
- 25 W Maximum Output Power
CALIBURN Explorer
- Dimensions: 128.1mm x 26mm x 14.6mm
- PCTG Aluminum-Alloy Chassis Material
- 32W Max Output Power
- 0.8-1.2ohm Resistance Range
- 1000mAh Battery Capacity
- USB Type-C Charging Port
Please read the following information before use CALIBURN Device:
- Insert the pod into the device first than remove the drip tip.
- Install through e-liquid inlet, cap the pod with drip tip and wait for 10min.
- Press the fire button 5 times to turn it on, and you can vape directly or press the fire button to vape.
Instruction ( How to fill the pod)
- Insert the pod cartridge into the body
- Take out the drip tip
- Fill with e-liquid
- Cap the pod with the drip tip
Attention
- When filling the e-liquid, please fill through filling port rather than airway in the middle
- Do not leave the filling port open, After filling, please cap the pod with drip tip to prevent e-liquid leakage.
- To avoid dry-burning and damaging the coil, please wait for 10min after the first e-liquid top-up.
- Please refill immediately when e-liquid level reaches the “min” mark.
Start & Stop
- Press the fir button 5 times consecutively within 2 seconds to turn on/off, and the LED indicator light will flash 3 times to signal.
Vaping
- When the device is on, it can be fired by drawing or pressing the fire button, and the LED indicators will be on while the device is working. The maximum working time is 8 seconds with each draw as a protection. In the case of exceeding 8 seconds of continuous drawing, the device will case working, while the LED indicators will flash in green 5 times as a prompt.
Instruction for CALIBURN Replacement of Pod Cartridge
- Take out the old pod cartridge from the body and insert a new one.
- To avoid dry-burning and damaging the coil, please wait for 10min after the first e-liquid top up
Battery indication function
- The LED will flash green to signal the remaining battery capacity is over 60%; blue to signal 30-60%; red to signal below 30%; 10 times of red flash upon battery depletion.
Short circuit protection
- In the case of short-circuit, the indicators will flash red 3 times and stop working.
Low voltage protection
- The indicators will flash red 10 times and stop working if the battery depleted.
Timeout protection
- The maximum working time is 8seconds with each draw as a protection. In case of exceeding 8 seconds of continuous drawing, the device will case working, while the LED indicators will flash in green 5 times as a prompt.
Open circuit prompt
- When the pod cartridge is not connected properly or not connected, the LED indicators will flash blue 3 times to signal open circuit.
Charging
- While charging, the indicators will flash to signal power level; green to signal battery level is charged over 60%; blue to signal 30%-60%; red to signal below 30%; indicators will stay on upon charge completion.
UWELL Customer Service
- We pride ourselves in manufacturing quality products and providing excellent customer service. For any issues, please contact us at service@muwell.com.
- UWELL reserves the right to final interpretation of the user manual.
- It is hereby stated that the markable area on the product is not enough to mark the CE and WEEE as the standard dimension.